
Kategori
CAMSWITCH 4 MOBILE
VCS-4P1-MOB
4+1 port 12/24V DC powered 802.3at PoE switch
Datasheet Link : CAMSWITCH 4 MOBILE
Kullanım Kılavuzu : CAMSWITCH 4 MOBILE

CAMSWITCH Mobile, IP kameraların ve diğer PoE ve ağ cihazlarının mobil, pil/güneş enerjisi gibi düşük voltajlı uygulamalarda ideal çözümdür. 5 veya 10 portlu 10/100 Ethernet anahtarını, 8 ila 40 volt DC beslemeyi 80 watt IEEE 802.3af/at uyumlu bir güç kaynağına dönüştürerek entegre eder.
CAMSWITCH 4 Mobile, 4adet 802.3at PoE portu, 1adet PoE olmayan port ve çok yönlü bir DC güç girişine sahiptir.
CAMSWITCH 8 Mobile, 8adet 802.3at PoE portu, 2adet PoE olmayan port ve çok yönlü bir DC güç girişine sahiptir.
CAMSWITCH Mobile, 8 kW'a kadar düşük bir DC geriliminden PoE cihazlarına 80 watt IEEE802.3af/802.3at uyumlu PoE gücü sağlar, bu da mobil veya düşük pil senaryolarında sürekli çalışma sağlar. Port'lar mobil NVR'ler gibi PoE olmayan ekipman için de kullanılabilir.
CAMSWITCH Mobile'ın dahili 10/100 Ethernet anahtarı, hız, dupleks ve kablo türüne göre tamamen otomatik olarak yapılandırılır. PoE otomatik olarak algılanır ve etkinleştirilir. Kullanıcı yapılandırması gerekmez.

ÜRÜN SİPARİŞ KODLARI:
VCS-4P1-MOB | CAMSWITCH 4 Mobile, 4+1 port low voltage 802.3at switch |
VCS-8P2-MOB | CAMSWITCH 8 Mobile, 8+2 port low voltage 802.3at switch |
POWER INPUT | |
Connector | Detachable screw terminal |
Voltage | 8.5 - 40V (minimum startup voltage is 10.5V, supports engine cranking and reduce overdischarge) DC only (contact Veracity for 24V AC applications) |
Fusing | The use of an external fuse is recommended. Rating: 5 amps for 24V DC or 10 amps for 12V DC supply, slow blow type |
POE OUTPUTS | |
POE standard | IEEE 8023.af / IEEE 802.3at compatible |
Not isolated from DC input; for use in closed system transport applications; | |
Connected devices must be IEEE compliant | |
Veracity enhanced POE supports maximum efficiency and range | |
POWER BUDGET | |
24V input | 80 watts total camera power |
12V input | 80 watts ( reduce to 65 watts for max 30ºC temperature rise above ambient ) |
<12V input | 60 watts ( reduce to 50 watts if voltage can drop below 10V ) |
POE power conversion produces heat; the above limits are for horizontal mounting with ventilation Installation in enclosed spaces will cause additional heating and power limiting Warning: enclosure may become hot in operation |
|
Ethernet INTERFACE | |
Connector | RJ45, 5-port unmanaged 10/100 switch |
Rates | 10BASE-T or 100BASE-T and duplex, auto-configuring for speed |
Cable | Straight through or crossover Cat 5, Cat 5e or Cat 6 patch |
*** VCS-8P2-MOB supports VLAN trunking | |
LED INDICATORS | |
Green - POE Ports | Constant...............POE enabled |
Off........................No POE requested | |
Green - Non POE Ports | Constant................Power OK |
Off........................No power | |
Yellow | Constant................Ethernet OK |
Blink......................Network activity | |
PHYSICAL/ENVIRONMENTAL | |
Dimensions | L 110mm / 131mm with side clips W 100mm including connectors H 40mm |
Mounting (brackets inc.) | 5mm mounting holes on 122mm centres |
Weight | 290g (VCS-4P1-MOB) / 350g (VCS-8P2-MOB) |
Operating temperature | -10oC to 50oC |
Relative humidity | Up to 85%, non-condensing |
Compliance | CE, FCC, RoHS |
Bu ürüne ilk yorumu siz yapın!